Specifications

Figure 2-1: Installation Procedure Flowchart
2.5. Unpacking the Subsystem
The subsystem components are packed in several boxes.
WARNING!
For a detailed packing list, refer to the included Unpacking List. Do not rely on the
non-definitive, summarized checklist shown below--it is for reference only.
The following items should be packed in individual boxes and are not pre-installed:
 Twenty four (24) drive trays
 Accessory items
 Optional BBU module
NOTE:
If purchased, the optional BBU module may not be included in the subsystems
shipping package. It is usually shipped in a separate box.
The enclosure chassis, with its pre-installed components, is located at the bottom of the
package. The pre-installed components include:
 Single controller module
 Three (3) PSU modules
2-4
Unpacking the Subsystem