Product specifications

Falcon II SCSI-SATA Installation and Hardware Reference Manual
5. Lock the flap into place by turning the key-lock until the groove on its
face is pointing down (vertical orientation). (See Figure 2-14)
Figure 2-14: Drive Tray Key-lock Rotation
6. Once the drive tray is inserted, the RAID controller will recognize the
drive and scan it in automatically.
2.10 Rack/Cabinet Installation
PN: IFT-9273CSlider36
PN: IFT-9273CSlider32
The FALCON II subsystem has been designed to fit into a standard cabinet or
rack. Two (2) slide rails are available for installing the subsystem into a
rack or cabinet. Please contact your system vendor for further details. The
subsystem should be installed in the rack or cabinet before the hard drives
and the drive trays are installed. If the drive trays with the associated hard
drives are installed, the subsystem will be too heavy to mount into a rack or
cabinet. When installing the subsystem into a rack or cabinet it is advisable
that three people assist in the mounting process.
To install the subsystem into a rack or cabinet please refer to the installation
instructions that came with the slide rails.
2-14
Rack/Cabinet Installation