Product specifications

Falcon II SCSI-SATA Installation and Hardware Reference Manual
2.8.4 Drive Installation with a Dongle Kit
1. For PATA drives, connect the drive to the dongle kit and make sure
that the dongle kit connector is firmly attached to the hard drive
connector. Connect the ATA and power cables from the dongle kit to
the hard drive. (See Figure 2-9) Make sure that these connections are
secure and will not come loose.
Figure 2-9: PATA Hard Drive Connectors
2. Once the connectors from the dongle board have been firmly attached
to the hard drive, place the hard drive into the drive tray as shown in
Figure 2-10.
Figure 2-10: Inserting the PATA Hard Drive
3. Adjust the drive’s location until the mounting holes in the drive
canister align with those on the hard drive. Secure the drive with four
(4) of the supplied 6/32 flat-head screws.
2.9 Drive Tray Installation
Once the hard drives have been installed in the drive trays, the drive trays
can be installed into the FALCON II.
WARNING!
All drive trays must be installed into the enclosure even if they do not
contain a hard drive. If the trays are not installed into the enclosure, the
ventilation required for cooling will not be normalized and the subsystem
will overheat.
2-12
Drive Tray Installation