Product specifications

Chapter 2: Hardware Installation
Figure 2-7: Installing a Dongle Kit
NOTE:
Only use the screws provided in the dongle kit package. The screws size
should be 6#32*4mm. Using an unmatched screw could result hard drive
malfunction.
2.8.3 Drive Installation without a Dongle Kit
1. Place the SATA hard drive into the drive tray as shown in Figure 2-8,
making sure that the hard drive is oriented in such a way that the SATA
connector is facing the back of the drive tray.
Figure 2-8: Installing a SATA Hard Drive
2. Adjust the drive’s location until the mounting holes in the drive
canister are aligned with those on the hard drive. Secure the drive with
four (4) of the supplied 6/32 flat-head screws. (See Figure 2-8)
Hard Drive Installation
2-11