Product specifications

Falcon II SCSI-SATA Installation and Hardware Reference Manual
1.2.2 Drive Trays
Figure 1-7: Drive Tray Front View
PN: IFT-9273CDTray or IFT-9273ADT1S1P (with dongle kit preinstalled)
The FALCON II subsystem comes with sixteen (16) drive trays (See
Figure 1-7) designed to accommodate separately purchased standard 1-inch
pitch, 3.5-inch disk drives. The drive bays are easily accessible from the
front of the enclosure. Two (2) LEDs on the front of the tray indicate the
drive status. A key-lock on each drive tray secures the hard drive in place,
while an easily accessible button ensures fast and efficient drive hot-
swapping.
WARNING!
Be careful not to warp, twist, or contort the drive tray in any way (e.g., by
dropping it or resting heavy objects on it). The drive tray has been
customized to fit into the drive bays in the FALCON II subsystem. If the
drive bay superstructure is deformed or altered, the drive trays may not fit
into the drive bay.
1.2.3 SATA to PATA Dongle Kits
Figure 1-8: Dongle Kit
PN: IFT-9270AN1S1P
FALCON II is designed to operate with SATA or SATA-II drives. Prior to
purchasing the subsystem, you should have determined whether to use
SATA, SATA-II, or parallel ATA (PATA) hard drives. If you wish to use
PATA hard drives in your subsystem, the sixteen (16) SATA-to-PATA
dongle kits must be purchased separately and installed independently. (See
Figure 1-8)
1-6
FALCON II Subsystem
Components