Product specifications

Falcon II SCSI-SATA Installation and Hardware Reference Manual
1.1.2 Enclosure Chassis
1.1.2.1 Chassis Overview
The FALCON II RAID storage subsystem chassis is an enhanced 3U metal
chassis divided into front and rear sections, which are respectively accessed
through front (see Figure 1-3) and rear (see Figure 1-5) panels. Pre-drilled
mounting holes in the sides of the 3U RAID subsystem enclosure allow you
to attach separately purchased slide rails so that you can install the enclosure
into a rack or cabinet.
NOTE:
Components accessed through the front panel are referred to as Front
Panel Components and components accessed through the rear panel are
referred to as Rear Panel Components
Figure 1-2: FALCON II Subsystem Overview
1.1.2.2 Physical Dimensions
The FALCON II comes in an enhanced 3U chassis with the following
dimensions:
• With handles: 482.6mm x 131mm x 504.3mm (width x height x
depth)
• Without handles: 445mm x 130mm x 488.2mm (width x height x
depth)
1-2
Product Overview