User manual

SCSI to SATA II RAID Subsystem

User Manual

Notification Level:

Events are classified to 5 levels (Critical, Error, Warning, Notice, Info).

Event Log Level

Slot inserted Notice

Slot removed Notice

Temperature back to normal Notice

Voltage back to normal Notice

PSU back to normal Notice

Fan back to normal Notice

UPS not present Notice

UPS standby Notice

Array deleted Notice

Array created Notice

Array modified Notice

Array initialization completed Notice

Array rebuild completed Notice

Array expansion completed Notice

Array parity checking completed Notice

Disk clone succeeded Notice

Volume created Notice

Volume deleted Notice

Volume modified Notice

Over temperature Warning

Over voltage Warning

Low voltage Warning

PSU not present Warning

Fan not present Warning

Fail to setup network configuration Warning

Array initialization failed Warning

Array rebuild failed Warning

Array expansion failed Warning

Array parity checking failed Warning

Disk clone failed Warning

Mirror disk clone failed Warning

System restart Warning

Parity error detected Warning

Power Supply Unit(PSU) Fail Error

Fan fail Error

UPS on battery Error

Bad sector reallocation Info

Baud Rate:

Set the baud rate: 19200, 38400, 57600 or 115200 (Default: 115200)

To save the change in each setting, click the “Submit" button.