User manual

SCSI to SATA II RAID Subsystem
14
User Manual
3. RS-232 Port
The subsystem is equipped with a serial monitor port allowing you to connect to
a PC or terminal.
Below are the RS-232 settings.
4. R-Link Port : Remote Link through RJ-45 Ethernet for remote
management
The subsystem is equipped with one 10/100 Ethernet RJ45 LAN port. You can
use Java-based browser to manage the RAID subsystem through Ethernet for
remote configuration and monitoring.
Link LED: Green LED indicates Ethernet is linking.
Access LED: The LED will blink orange when the 100Mbps Ethernet is being
accessed.
5. Alarm Mute Button
When the audible alarm is sounding, press this button to mute the audible
alarm.
6. Hard Contact Relay
Settings
Baud Rate 115200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None