User`s guide

Metered Rack PDU for High Density
3
Mounting options
You can install the Rack PDU in one of two ways:
using toolless mounting pegs (provided) or the
mounting brackets (provided).
• To install the Rack PDU using the toolless
mounting method, install it in the rear of the
NetShelter
®
SX Enclosure, in the cable channel
directly behind the rear vertical mounting rails.
• To install the Rack PDU using the mounting
brackets, install it on a vertical mounting rail on
your rack or enclosure.
Toolless mounting
1. Slide both mounting pegs into the holes
located in the channel in the rear panel of the
enclosure.
2. Snap the Rack PDU into place by pushing it
downward until it locks into position.
Note: You can mount four half-
height and two full-height Rack
PDUs on one side of the enclosure
by using the toolless mounting
method.
pdu0342b