User`s guide

Metered Rack PDU for High Density

Install the Rack PDU

Attach the cord retention trays

Attach the cord retention trays to the Rack PDU, using

four flat-head screws (provided) per tray.

Attach cords to the tray

Attach a cord to the tray by looping the cord and

securing it to the tray, using a wire tie (provided).

Note: Each cord must be secured to the

tray so that you can unplug it from the Rack

PDU without removing the wire tie.

Note: When installing the Rack PDUs,

ensure that the power cord plug is

accessible and that the Rack PDU is

connected to a grounded outlet.

u0123b

pdu0123d

pdu0127b

pdu0127d