Rack Power Distribution Unit—AP7562, AP7563, AP7564 General Information Description This booklet provides information on installing and operating the Rack Power Distribution Units (PDUs) AP7562, AP7563, and AP7564.
General Information Inventory (for AP7562 and AP7564) Inventory (for AP7563) Receiving inspection Please recycle 2 Quantity Item 3 Cord retention tray (with 12 flat-head screws and 48 wire ties) 2 Mounting brackets (with 4 flat-head screws) 1 Warranty registration card Quantity Item 2 Cord retention tray (with 8 flat-head screws and 24 wire ties) 2 Mounting brackets (with 4 flat-head screws) 1 Warranty registration card Inspect the package and contents for shipping damage, and make sur
How to Install the Rack PDU Attach the cord retention trays Attach the cord retention trays to the Rack PDU, using four flat-head screws (provided) per tray. Attach cords to the tray Attach a cord to the tray by looping the cord and securing it to the tray, using a wire tie (provided). Note Each cord must be secured to the tray so that you can unplug it from the Rack PDU without removing the wire tie.
How to Install the Rack PDU Mounting options You can install the Rack PDU in one of two ways: using toolless mounting pegs (provided) or the mounting brackets (provided). • To install the Rack PDU using the toolless mounting method, install it in the rear of the NetShelter VX Enclosure, in the cable channel directly behind the rear vertical mounting rails. • To install the Rack PDU using the mounting brackets, install it on a vertical mounting rail on your rack or enclosure. Toolless mounting 1.
How to Install the Rack PDU Bracket-mounting To mount the Rack Rack PDU vertically in a NetShelter® or any standard EIA-310 rack or enclosure: 1. Attach the vertical-mounting brackets to the Rack PDU.
How to Install the Rack PDU 2. Install the Rack PDU on a vertical mounting rail in your rack or enclosure.
Specifications Electrical AP7562 AP7563 AP7564 Nominal input voltage 120V 120V or 208V 208V Acceptable input voltage ± 10% Nominal input voltage Input frequency 47–63 Hz Cord length 3 ft. Input connectors NEMA L21-20 plug Output connectors 42 NEMA 5-20 outlets 21 NEMA 5-20; 6 NEMA L6-20 outlets 36 IEC 320 C13; 6 IEC 320 C19 outlets Maximum total current draw 16 A per Phase Physical Size (H × W × D) 70.00 ×2.19×1.73 in (177.80 ×5.56×4.39 cm) Weight 12 lb (5.44 kg) Shipping weight 19.
Warranty and Service Limited warranty APC warrants the Rack PDU to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser.
Life-Support Policy General policy American Power Conversion (APC) does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the APC product can be reasonably expected to cause failure of the life-support device or to affect significantly its safety or effectiveness. • In direct patient care.
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.com/support/ Global support searching APC Knowledge Base and using e-support.
