Installation Basic Rack Power Distribution Units AP9560 AP9561
Contents Preliminary Information . . . . . . . . . . . . . . . . . . .1 AP9560 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AP9561 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety and Grounding . . . . . . . . . . . . . . . . . . . .2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Horizontal mounting . . . . . . . . . . . . . . . . . 3 Vertical mounting . . . . . . . . . . . . . . . . . . . 4 Specifications. . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Information American Power Conversions (APC®) AP9560 and AP9561 are 30 A rack-mount Power Distribution Units (PDUs) that provide 120 V, 208 V power to rack-mount equipment.
Safety and Grounding Please read the following information before installing or operating your PDU: • This PDU is intended for indoor use only. • Do not install this PDU where excessive moisture or heat is present. • Never install any wiring, equipment, or PDUs during a lightning storm. • Plug this PDU into a three-wire, grounded power outlet only. The power outlet must be connected to appropriate branch circuit/mains protection (fuse or circuit breaker).
Installation PDUs can be mounted in any standard EIA-310 rack or enclosure. Horizontal mounting 1. Attach the horizontal mounting brackets (provided) to the PDU. Use only supplied screws. pdu0085a Caution pdu0080a 2. Install the PDU using the screws and caged nuts included with your rack or enclosure. The PDU will occupy 1 U-space.
Installation Vertical mounting pdu0090a 1. Attach the vertical-mounting brackets to the PDU. pdu0083a 2. Install the PDU on a vertical mounting rail in your rack or enclosure.
Specifications Electrical Input voltage range AP9560: 100–120 V AP9561: 200–240 V Max current draw AP9560: 24 A AP9561: 24 A Physical Dimensions (H × W × D) 1.75 × 17.60 × 2.25 in (4.45 × 44.70 × 5.72 cm) Shipping dimensions (H × W × D) 6.00 × 19.12 × 6.95 in (15.20 × 48.60 × 17.65 cm) Weight 5.5 lb (2.5 kg) Shipping weight 8.0 lb (3.
Warranty and Service Limited warranty APC warrants the Rack PDU to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser.
Warranty and Service 4. Pack the unit carefully. The warranty does not cover damage sustained in transit. Enclose a letter with your name, address, RMA number and daytime phone number; a copy of the sales receipt; and a check as payment, if applicable. 5. Mark the RMA number clearly on the outside of the shipping carton. 6. Ship by insured, prepaid carrier to the address provided by the Customer Support technician.
Life-Support Policy General policy American Power Conversion (APC) does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the APC product can be reasonably expected to cause failure of the life-support device or to affect significantly its safety or effectiveness. • In direct patient care.
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.com/support/ Global support searching APC Knowledge Base and using e-support.
