User Manual
Table Of Contents
- Safety and General Information
- Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.
- SAVE THESE INSTRUCTIONS - This section contains important instructions that should be followed during installation and maintenance of the UPS and batteries.
- Inventory
- Connect the Battery
- BR650MI /BR900MI
- BR1300MI / BR1600MI
- Install PowerChute™ Personal Edition Software
- Installation
- Connect the Equipment
- BR650MI / BR900MI
- BR1300MI /BR1600MI
- Operation
- Power saving display
- Unit sensitivity
- Front panel buttons and display interface
- Alarms and System Errors
- Audible indicators
- Status icons
- System errors
- Function Button Quick Reference
- Troubleshooting
- Specifications
- Battery Replacement
- Warranty
- APC by Schneider Electric IT Customer Support Worldwide
- User Manual Back-UPS™ Pro BR650/900/1300/1600MI
Back-UPS Pro BR650MI / BR900MI / BR1300MI / BR1600MI10
Specifications
Model BR650MI BR900MI BR1300MI BR1600MI
VA 650 VA 900 VA 1300 VA 1600 VA
Maximum Load 390 W 540 W 780 W 960 W
Nominal Input Voltage 220 - 240 Vac
Online Input Voltage
Range
176 - 294 Vac
Automatic Voltage
Regulation
Boost by +11.5% when input voltage drops below limit
Trim by -11.5% when input voltage exceeds limit
Frequency Range 50/60 Hz ± 3 Hz
Battery Type Lead acid, 12V with 1 battery Lead acid, 12V with 2 batteries
On-battery Waveshape Step-approximated sine-wave
Typical Recharge Time 12 hours 16 hours
Transfer Time 8 ms (typical), 10 ms (maximum)
On Battery Runtime Go to: www.apc.com
Interface USB
Operating Temperature 08 to 408 C (328 to 1048 F)
Storage Temperature -58 to 458 C (238 to 1138 F)
IP Rating IP20
Unit Dimensions
19 x 9.1 x 31 cm
(7.5 x 3.6 x 12.2 in)
25 x 10 x 38.2 cm
(9.8 x 3.9 x 15 in)
Unit Weight
6.8 kg
(15 lbs)
7.2 kg
(15.9 lbs)
10.2 kg
(22.5 lbs)
11.0 kg
(24.3 lbs)