Installation guide
Table Of Contents
- About this Manual
- Companion manuals
- How to find updates to this manual
- Safety
- IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
- Symbols used in this manual
- Regulatory Agency Approval
- Overview
- User Interface
- Interface area
- Display Interface
- How to navigate the user interface
- Menu tree
- Operation
- Operation Procedures
- How to perform a total power off procedure
- How to view the Power Distribution Module status
- How to view Power Distribution Module information
- How to view circuit status information
- How to view output voltages
- How to view the log
- How to clear the log
- How to view the list of active alarms
- Configuration
- Settings
- How to set up the network
- How to set the name and location of the circuits
- How to set the individual alarm thresholds
- How to set the alarm thresholds for all Power Distribution Modules in the system
- How to change the display settings
- How to set and change the password settings
- How to change date and time
- Maintenance
- Parts Replacement
- How to determine if you need a replacement part
- How to return parts to APC
- How to install a Power Distribution Module
- How to remove a filler plate
- How to test the Residual Current Device
- How to install a PDM circuit breaker handle tie
- How to reinstall a filler plate
- Troubleshooting
- LED Indication on the Power Distribution Modules
- Status and Alarm Messages
ii Modular Power Distribution Unit – Operation
Modules in the system
. . . . . . . . . . . . . . . . . . . . . . . . . . . .13
How to change the display settings . . . . . . . . . . . . . . . . . . .14
How to set and change the password settings . . . . . . . . . . . .14
How to change date and time . . . . . . . . . . . . . . . . . . . . . . .15
Maintenance...................................................................16
Parts Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
How to determine if you need a replacement part . . . . . . . . . .16
How to return parts to APC . . . . . . . . . . . . . . . . . . . . . . . . .16
How to install a Power Distribution Module . . . . . . . . . . . . . .17
How to remove a filler plate . . . . . . . . . . . . . . . . . . . . . . . . .18
How to test the Residual Current Device . . . . . . . . . . . . . . . .20
How to install a PDM circuit breaker handle tie . . . . . . . . . . . .20
How to reinstall a filler plate . . . . . . . . . . . . . . . . . . . . . . . .21
Troubleshooting ............................................................22
LED Indication on the Power Distribution Modules . . . . . . . . . . . . 22
Status and Alarm Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23