User guide

31User Guide InfraStruxure 150kVA Power Distribution Unit
Breakers & Cables
Each breaker and associated cables can be queried for status, configured for alarm thresholds and
identified with name and location. The Command Console implements a "panel.breaker” notation in the
commands, for example: 2.13 indicates panel 2 breaker 13.
The breaker commands are:
brkrPanel
brkrTarget
brkrStatus
brkrAlarm
brkrThrMx
brkrThrHi
brkrThrLo
brkrThrMn
brkrName
brkrLoc
Manufacturing Info
The devices that comprise the 150kW PDU are configured at manufacture time and at assembly time.
This information is available through the following commands:
mfactMeter
mfactIs
mfactCTs
mfactkWs
mfacthWhs
mfactCalFs
mfactRdReg
See manufacturing commands starting on page 40
Input Contacts
Input contacts provide a means for an external stimulus to generate an alarm. The input contact
commands are:
icStatus
icTarget
icName
icLoc
icNormal
icStatus
icAlarm
icSeverity