User guide

User Guide InfraStruxure 150kVA Power Distribution Unit 24
reboot
Access: Administrator only
Description: Restart the interface of the PDU. Confirm the operation by entering a "YES" after the
command has been entered.
Example:
apc> reboot
E000: Success
Reboot Management Interface
Enter 'YES' to continue or <ENTER> to cancel <user enters 'YES'>
Rebooting...
resetToDef
Access: Administrator only
Description: Reset all configuration parameters to the factory default. Confirm the operation by
entering a "YES" after the command has been entered. The system will reboot if any configuration is
changed once the user logs out of the command line interface.
Example: To reset all of the configuration changes except the TCP/IP settings, type:
apc> resettodef -p keepip
Reset to Defaults Except TCP/IP
Enter 'YES' to continue or <ENTER> to cancel <user enters 'YES'>
all User Names, Passwords.
Please wait...
Please reboot system for changes to take effect!
snmp, snmp3
Access: Administrator only
Description: Enable or disable SNMP 1 or SNMP 3.
Example: To enable SNMP version 1, type:
apc> -S enable
E000: Success
SNMPv3
Option Arguments Description
-p all | keepip all = Reset all configuration changes, including event actions, device settings, and
TCP/IP configuration settings.
keepip = Reset all configuration changes except the IP address.
Option Arguments Description
-S enable | disable Enable or display the respective version of SNMP, 1 or 3.