User guide

User Guide InfraStruxure 150kVA Power Distribution Unit 12
Interface Management Commands
? or help
Access: Administrator, Device
Description: View a list of all the commands available to your account type. To view help text for a
specific command, type the command followed by a question mark (?) or the word help.
Example 1:
apc > ?
Network Management Card Commands:
---------------------------------------------------------------------
? about alarmcount boot cd date
delete dir eventlog exit format ftp
help ping portspeed prompt quit radius
reboot resetToDef system tcpip user web
xferINI xferStatus
Device Commands:
---------------------------------------------------------------------
brkrPanel brkrTarget brkrStatus brkrAlarm brkrThrMx
brkrThrHi brkrThrLo brkrThrMn brkrName brkrLoc
subfdThrMx subfdThrHi subfdThrLo subfdThrMn subfdAlarm
subfdTarget subfdName subfdLocation subfdStatus
Example 2:
apc > help boot
Usage: boot -- Configuration Options
boot [-b <dhcpBootp | dhcp | bootp | manual>] (Boot Mode)
[-a <remainDhcpBootp | gotoDhcpOrBootp>] (After IP Assignment)
[-o <stop | prevSettings>] (On Retry Fail)
[-c <enable | disable>] (Require DHCP Cookie)
[-s <retry then stop #>] (Note: 0 = never)
[-f <retry then fail #>] (Note: 0 = never)
[-v <vendor class>]
[-i <client id>]
[-u <user class>]