User guide

93User Guide InfraStruxure 150kVA Power Distribution Unit
Use an .ini File
Path: Administration > General > User Config File
Use the settings from one PDU to configure another. Retrieve the config.ini file from the configured
PDU, customize that file (e.g., to change the IP address), and upload the customized file to the new PDU.
The file name can be up to 64 characters, and must have the.ini suffix.
To retrieve and customize the file of a configured PDU, see “Export Configuration Settings” on page 98.
Instead of uploading the file to one PDU, you can export the file to multiple PDUs by using an FTP or
SCP script or a batch file and the APC .ini file utility, available from www.apc.com/tools/download.
Temperature Units
Path: Administration > General > Unit Preference
Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in
this user interface.
Reset the Interface
Path: Administration > General > Reset/Reboot
Configuring Links
Path: Administration > General > Quick Links
Select the Administration tab, General on the top menu bar, and Quick Links on the left navigation
menu to view and change the URL links displayed at the bottom left of each page of the interface.
By default, these links access the following Web pages:
• Link 1: The home page of the APC Web site.
• Link 2: A page where you can use samples of APC Web-enabled products.
• Link 3: The home page of the APC Remote Monitoring Service.
Status Reports the progress of the upload. The upload succeeds even if the file contains errors, but a system
event r reports the errors in the event log.
Upload Browse to the customized file and upload it so that the current PDU can use it to set its own
configuration
.
Action Definition
Reboot
Management
Interface
Restarts the interface of the PDU.
Reset All
1
Select Exclude TCP/IP to reset all values except TCP/IP; clear Exclude TCP/IP to reset all
configuration values.
Reset Only
1
TCP/IP settings: Set TCP/IP Configuration to DHCP & BOOTP, its default setting,
requiring that the PDU receive its TCP/IP settings from a DHCP or BOOTP server. See
“TCP/IP and Communication Settings” on page 29.
Event configuration: Reset all changes to event configuration, by event and by group, to
their default settings.
1. Resetting may take up to a minute.