User`s guide

®
USER’S GUIDE
Switched Rack PDU
88
2. Use the case-sensitive User Name and Password for Administrator or Device User
to log on. For Administrator, apc is the default for User Name and Password. For
the Device User, the defaults are device for User Name and apc for Password.
3. Use the get command to transmit the text of a log to your local drive.
ftp>get event.txt
or
ftp>get data.txt
4. You can use the del command to clear the contents of either log.
ftp>del event.txt
or
ftp>del data.txt
You will not be asked to confirm the deletion.
–If you clear the data log, the event log records a deleted-log event.
–If you clear the event log, a new event.txt file records the event.
5. Type
quit at the ftp> prompt to exit from FTP.
Queries (SNMP GETs)
See SNMP for a description of SNMP access types that enable a NMS to
perform informational queries. Configuring the most restrictive SNMP access
type, READ, enables informational queries without allowing remote
configuration changes.