User`s guide

®
USER’S GUIDE
Switched Rack PDU
81
SNMP Trap Test (Administration>Notification>SNMP Traps>test)
Last Test Result. The result of the most recent SNMP trap test. A successful SNMP
trap test verifies only that a trap was sent; it does not verify that the trap was received
by the selected trap receiver. A trap test succeeds if of the following are true:
• The SNMP version (SNMPv1 or SNMPv3) configured for the selected trap receiver is
enabled on this device.
• The trap receiver is enabled.
If a host name is selected for the To address, that host name can be mapped to a valid
IP address.
To. Select the IP address or host name to which a test SNMP trap will be sent. If no
trap receiver was ever configured, a link to the Trap Receiver configuration page is
displayed. (If a trap receiver was deleted, or was reset to its default values by this or
any other management application, the default values for its trap type are listed.)