User`s guide

®
USER’S GUIDE
Switched Rack PDU
69
ISX Protocol (control console only)
Use this option to enable (the default) or disable the APC InfraStruXure (ISX) Protocol.
The APC InfraStruXure (ISX) Protocol allows the Switched Rack PDU to communicate
with other APC devices, including the InfraStruXure Manager, if your system includes
one.
SNMP
SNMPv1 (Administration>Network>SNMPv1>options)
All user names, passwords, and community names for SNMP are transferred over the
network as plain text. If your network requires the high security of encryption, disable
SNMP access or set the access for each community to Read. (A community with Read
access can receive status information and use SNMP traps.)
When using InfraStruXure Manager to manage a Switched Rack PDU on the public
network of an InfraStruXure system, you must have SNMP enabled in the Rack PDU
interface. Read access will allow InfraStruXure Manager to receive traps from a
Switched Rack PDU, but Write access is required while you use the interface of the
Rack PDU to set InfraStruXure Manager as a trap receiver.
See also
For detailed information on enhancing and managing the security of your
system, see the Security Handbook, available on the Switched Rack PDU
Utility CD or from the APC Web site, www.apc.com.
Option Description
access Enable SNMPv1 Access: Enables SNMP version 1 as a method of communication
with this device.