User`s guide

USER’S GUIDE

Switched Rack PDU

Edit, disable, enable, or delete a scheduled outlet event

1. At the Web interface, select the Device Manager tab and then Scheduling from

the left navigation menu.

2. In the event list in the Scheduled Outlet Action section of the Scheduling page,

click on the name of the event.

3. On the Daily/Weekly scheduled action detail page, you can do any of the

following:

– Change details of the event, such as the name of the event, when it is scheduled to

occur, and which outlets are affected.

– Under Status of event at the top of the page you can perform the following tasks:

• Disable the event, leaving all its details configured so that it can be re-enabled

later. A disabled event will not occur. An event is enabled by default when you

create it.

• Enable the event, if it was previously set to Disable.

• Delete the event, removing the event completely from the system. A deleted

event cannot be retrieved.

4. When you finish making changes on this page, click Apply to confirm the changes

or Cancel.

Outlet Manager Menu

Create and configure outlet user accounts. Individual outlets can be assigned a user

with an Outlet User account. An Outlet User account allows control only to the outlets

assigned. The configuration of outlets is allowed to those with Administrator rights. The

Device Manager has limited outlet configuration rights.

Configure outlet user

1. At the Web interface, select the Device Manager tab and then Outlet Manager

from the left navigational menu.

2. Click the Add New User button.