User`s guide

®
USER’S GUIDE
Switched Rack PDU
46
Configure outlet settings and the outlet name
Settings that you can configure. The following settings are available in both the
Web interface and control console unless otherwise indicated:
Setting Description
Name (Web
interface)
Outlet Name
(control console)
Set the name for one or more outlets. The name is displayed next
to the outlet number on status screens.
Link (Web
interface)
Define an HTTP or HTTPS link to a Web site or IP address.
• http://www.apc.com links the outlet to the home page of the APC
Web site.
• http://pdu_ip_ address, where pdu_ip_add ress is the IP
address of the Switched Rack PDU and links the outlet to the Web
interface of the Switched Rack PDU at the IP address, enabling
authorized users to log on.
Power On Delay Set the number of seconds that the Rack PDU waits after a
command is issued before applying power to an outlet.
N
OTE: To configure an outlet to remain off at all times, check the
Never checkbox next to Power On Delay in the Web interface, or
configure a value of
–1 for Power On Delay in the control console.
Power Off Delay Set the number of seconds that the Rack PDU waits after a
command is issued before removing power from an outlet.
N
OTE: To configure an outlet to remain on at all times, check the
Never check box next to Power Off Delay in the Web interface, or
configure a value of
–1 for Power Off Delay in the control console.
Reboot Duration Set the number of seconds an outlet remains off before restarting.