User`s guide

®
USER’S GUIDE
Switched Rack PDU
40
IP address) are the same for all Rack PDUs to be linked.
3. Click Create Global Outlet Groups.
4. For each global outlet group you create, select an outlet by clicking on its checkbox.
Then click Apply. For example, select five outlets to create five outlet groups, each
consisting of one global outlet.
5. To add outlets to any of the global outlet groups you created, see Edit or delete an
outlet group.
Edit or delete an outlet group
1. From the Device Manager tab, select Information from the Outlet Groups left
navigation menu.
2. Under Configured Outlet Groups, click on the number or name of the outlet group
to edit or delete.
3. When editing an outlet group you can do any of the following:
–Rename the outlet group.
–Add or remove outlets by clicking the checkboxes to mark or unmark them.
4. To delete the outlet group, click Delete Outlet Group.
See Enable outlet groups.
You cannot remove an outlet from an outlet group that contains
only two outlets unless the remaining outlet is a global outlet.