User`s guide

®
USER’S GUIDE
Switched Rack PDU
30
– Identify the Domain Name System (DNS) Server, test its network connection, and
enable or disable DNS Reverse Lookup Event Logging (which logs the domain
name of the device associated with each event).
– Define settings for FTP, Telnet, SSH, HTTP and HTTPS, SNMP, and e-mail.
– Configure the Rack PDU’s Syslog message feature.
• To do the following, see Administration: General Options:
– Control Administrator, Device User, Outlet User, and Read-Only User access.
– Define the system Name, Contact, and Location values.
– Set the date and time used by the Rack PDU.
– Restart the Rack PDU.
– Reset network settings to default settings.
– Define the URL addresses of the user links and APC logo links in the Web
interface, as described in Configure Links (Administration>General>Quick Links).
Help menu
Click Help from any Web interface page to view help text for that page.
Switched Rack PDU Settings
Configure Load Thresholds
Web interface.
1. Select the Device Manager tab and then the Load Management left navigation
menu.
2. Set Overload Alarm Threshold, Near Overload Warning Threshold, Low Load
Warning Threshold, and Overload Outlet Restrictions for each phase or bank.
3. Click Apply in that section to set the selected values.