User`s guide

®
USER’S GUIDE
Switched Rack PDU
29
Additional information on Home page
The IP address displays in the upper left corner.
A context-sensitive Help link and Log off link are displayed in the upper right corner of
every page.
Selecting a menu to perform a task
• To do the following, see Configure Load Thresholds:
– Configure the overload thresholds for each phase or bank.
– Set the Name, Location, and Coldstart Delay for the Rack PDU.
– Set the names and associated Web links for the outlets.
• To do the following, see Configure and Control Outlet Groups
– Apply power to and remove power from the outlets.
–Set Power On Delay, Power Off Delay, and Reboot Duration for the outlets.
– Set the names and associated links for the outlets.
– Create, enable, and use synchronized outlet groups.
• To do the following, see Configuring event actions:
– Access the event log.
– Configure the actions to be taken based on the severity level of an event.
– Configure SNMP Trap Receiver settings for sending event-based traps.
– Define who receives e-mail notification and Syslog messages for events.
– Test e-mail settings.
• To do the following, see Data log (Logs>Data>options):
– Access the data log.
– Define the log interval (how often data will be sampled and recorded) for the data
log.
• To do the following, see Administration: Network Features:
– Configure new TCP/IP settings for the Rack PDU.