User`s guide

®
USER’S GUIDE Network Management Card
94
Paging message formats
Analog Mode Format
Network
Management
Card event
code format
(for numeric
pagers only)
[site_ID][space_character][event_code]
• site_ID: A configurable 8-digit number to identify the location of the UPS.
See Numeric Site ID.
• space_character
: The character that the pager requires to display a
space. See
Space Character.
• event_code: A six-digit number, with the decimal form of the Network
Management Card event type as the first three digits and the decimal form of
the Network Management Card event number as the last three digits.
Example:
636792 001007
Out-of-Band
Management
Card event
code format
(for numeric
pagers only)
[site_ID][space_character][event_code]
• site_ID: A configurable 8-digit number to identify the location of the UPS.
See Numeric Site ID.
• space_character
: The character that the pager requires to display a
space. See
Space Character.
• event_code: A one- or two-digit number in the format of an Out-of-Band
Management Card event code after conversion from a Network Management
Card event code. See Conversion of event codes
.
Example: 752968 8
TAP Mode Format
For non-
numeric
pagers.
Maximum
message
length: 160
characters.
location_ID:severity:event_code:event_text
• location_ID: The IP address, host name, device name, numeric site ID,
or site name that uniquely identifies the location of the UPS.
location_ID
must be the type of identifier configured as Site ID Mode.
• severity: The severity of the event (severe, warning, or informational).
• event_code: The hexadecimal Network Management Card event code.
• event_text
: The Network Management Card event text.
Example: 139.234.6.49:Severe:0x0107:UPS: Batteries
Discharged