User`s guide

USER’S GUIDE

Network Management Card

The recipients option. Configure parameters for up to four paging recipients.

Site ID

Mode

(TAP only)

Select the type of identifier to be used in TAP paging messages:

• IP Address

• Host Name: the name of the host computer

• System Name: See Identification (Administration>General>Identification)

• Numeric Site ID.

• Site Name: The value configured as Site ID Name.

Default: IP Address

Setting Description

Name Uniquely identifies this paging recipient. Maximum: 20 characters

Access Enables or disables paging to this recipient. Default: Disabled

Analog

Mode or

TAP Mode

Select the type of paging service this pager uses, Analog Mode (the default) for

a numeric-only pager or TAP Mode for a pager that can receive text messages

and uses the TAP protocol.

Setting Description