User`s guide

®
USER’S GUIDE
Network Management Card
83
– The Header: a time stamp and the IP address of the Management Card.
– The message (MSG) part:
• The TAG field, followed by a colon and space, identifies the event type.
• The CONTENT field is the event text, followed (optionally) by a space and the
event code.
For example, APC: Test Syslog is valid.
Paging (Administration>Notification>paging>options)
On the Administration tab, choose Notification on the top menu bar, and use the
options under Paging on the left navigation menu to display and configure paging
recipients and Telolocator Alphanumeric Protocol (TAP) carriers, and to set up and test
paging. TAP is the most common digital paging protocol.
The general setup option. Configure these settings first (before recipients).
Paging requires an AP9618 Network Management Card EM/MDM. An
AP9618U kit is available from APC to upgrade an AP9617 Network
Management Card EX or an AP9619 Network Management Card EM to
include AP9618 features.
Setting Description
Numeric
Site ID
An 8-digit unique identification number for the UPS connected to this Network
Management Card.
• The number is part of each paging message from the Management Card to a
numeric (non-TAP) pager.
• The number is part of each paging message from the Management Card to a TAP
pager, if Numeric Site ID is selected as Site ID Mode.
Site ID
Name
(TAP only)
An alphanumeric character string that identifies the UPS connected to this Network
Management Card
. This string is part of each paging message from the
Management Card to a TAP pager, if Site Name is selected as Site ID Mode
.
Maximum: 30 characters