User`s guide

®
USER’S GUIDE
Network Management Card
5
Types of user accounts
The Management Card has three levels of access (Administrator, Device User, and
Read-Only User), which are protected by user name and password requirements.
• An Administrator can use all the menus in the Web interface and control console. The
default user name and password are both apc.
• A Device User can access only the following:
– In the Web interface, the menus on the UPS and Environment tabs and the event
and data logs, accessible under the Events and Data headings on the left
navigation menu of the Logs tab.
– In the control console, the equivalent features and options.
The default user name is device, and the default password is apc.
• A Read-Only User has the following restricted access:
– Access through the Web interface only.
– Access to the same tabs and menus as a Device User, but without the capability to
change configurations, control devices, delete data, or use file transfer options.
Links to configuration options are visible but disabled, and the event and data logs
display no button to clear the log.
The default user name is readonly, and the default password is apc.
To set User Name and Password values for the three account types, see
Setting user access (Administration>Security>Local Users>options).
You must use the Web interface to configure values for the Read-Only User.