User`s guide

®
USER’S GUIDE
Network Management Card
76
Configuring by event. To define event actions for an individual event:
1. Select the Administration tab, Notification on the top menu bar, and by event
under Event Actions on the left navigation menu.
2. In the list of events, review the marked columns to see whether the action you
want is already configured. (By default, logging is configured for all events.)
3. To view or change the current configuration, such as recipients to be notified by
e-mail or paging, or Network Management Systems (NMSs) to be notified by
SNMP traps, click on the event name.
Parameter Description
Delay x time
before sending
If the event persists for the specified time, notification is sent. If the condition
clears before the time expires, no notification is sent.
Repeat at an
interval of x time
The notification is sent at the specified interval (e.g., every 2 minutes).
Up to x times During an active event, the notification repeats for this number of times.
Until condition
clears
The notification is sent repeatedly until the condition clears or is resolved.
If no Syslog server is configured, items related to Syslog configuration are not
displayed.
When viewing details of an event’s configuration, you can change the
configuration, enable or disable event logging or Syslog, or disable notification
for specific e-mail recipients, trap receivers, or paging recipients, but you
cannot add or remove recipients or receivers. To add or remove recipients or
receivers, see the following:
• Identifying Syslog Servers (Logs>Syslog>servers)
• E-mail recipients (Administration>Notification>E-mail>recipients)
• Paging (Administration>Notification>paging>options)
• Trap Receivers (Administration>Notification>SNMP Traps>trap receivers)