User`s guide

USER’S GUIDE

Network Management Card

You can change the Port setting to the number of any unused port from 5001 to 32768

for added security. Users must then use a colon (:) to specify the non-default port

number. For example, for port 5001 and IP address 152.214.12.114, the command

would be ftp 152.214.12.114:5001.

WAP (for Smart-UPS models only)

Use this option to enable (the default) or disable the Wireless Application Protocol

(WAP). WAP is a standard for providing cellular phones, pagers, and other handheld

devices with secure access to e-mail and text-based Web pages. WAP runs on all

major wireless networks and is device-independent, so that it can be used with many

phones and handheld devices.

FTP transfers files without encryption. For higher security, disable the FTP

server, and transfer files with Secure CoPy (SCP). Selecting and configuring

Secure SHell (SSH) enables SCP automatically.

At any time that you want a UPS to be accessible for management by

InfraStruXure Manager, FTP Server must be enabled in the Management

Card interface of that UPS.

For detailed information on enhancing and managing the security of your

system, see the Security Handbook, available on the APC Network

Management Card Utility CD or from the APC Web site.