User`s guide

®
USER’S GUIDE Network Management Card
49
Environmental Monitoring
Overview Page
Environmental monitoring by internal and external devices
The Overview page, displayed when you select the Environment tab, lists the status
of environmental monitoring components and devices associated with the Network
Management Card of the UPS.
• For an AP9617 Management Card, status of an Environmental Monitoring Card in an
expansion chassis or in another card slot (of a UPS with multiple card slots).
• For an AP9618 Management Card, status of the sensors, input contacts, and output
relay of the Integrated Environmental Monitor.
• For an AP9619 Management Card, status of the components of the Integrated
Environmental Monitor and, if an external environmental monitoring device is
connected, status of the components of that device.
• For an APC S Type Power Conditioner with Battery Backup, the status of its sensor.
Heading Displayed Information
Temperature
and
Humidity
Lists all sensors and, for each sensor, the alarm status, temperature currently
recorded, and humidity (if supported) currently recorded. For detailed status or to
reconfigure a sensor's parameters, click the sensor's name.
Input
Contacts
Lists each enabled input contact and its alarm status and current state (open or
closed). For detailed status of an enabled input contact or to reconfigure that
contact's parameters, click the name of the contact.
N
OTE: To view or configure the parameters of a disabled contact, or to enable it,
you must access the interface page for that contact through Input Contacts on
the left navigation menu
Output
Relay
Lists the alarm status and the current state (open or closed) of the output relay of
the integrated Environmental Monitor. For detailed status of that output relay or
to reconfigure its parameters, click its name.