User`s guide

®
USER’S GUIDE
Network Management Card
2
– A paging feature that lets you configure any event to generate a page to one or
more configured analog or digital pagers when the event occurs. This feature
includes call-back capabilities. Optionally, you can convert Network Management
Card, UPS, and environmental monitoring event codes to the default Out-of-Band
Management Card event codes (supplemented by several additional numeric
codes).
• The AP9619 Network Management Card EM includes all AP9617 features and has
an Integrated Environmental Monitor with a temperature sensor, input contacts, and
an output relay.
• In addition to support for the UPS Network Management Cards, the Network
Management Card firmware supports the network-enabled model of the APC S Type
Power Conditioner with Battery Backup, which provides surge protection, isolated
noise filtering, and voltage regulation, in addition to battery backup, for high
performance audio-visual (AV), home security, and automation systems.
Upgrade kits available from APC. Use the AP9618U kit to upgrade AP9617 to
include the features of AP9618 or to upgrade AP9619 to include the AP9618 analog
modem. Use the AP9619U kit to upgrade AP9617 to include the features of AP9619.
For an AP9618 Network Management Card EM/MDM or AP9619 Network
Management Card EM you can also purchase a humidity sensor from APC.
APC devices in which you can install the Management Card. The Management
Card can be installed into the following APC devices:
• Any Smart-UPS
®
or Matrix-UPS
®
model that has an internal expansion slot, or any
Silcon
™
, AIS 5000, Symmetra
®
, or Symmetra PX UPS. (The APC S Type Power
Conditioner with Battery Backup, S20BLK, has an embedded Management Card.)
• Triple Chassis Protocol Converter (AP9604S), required for a Silcon UPS, which does
not have an expansion slot.
• Expansion Chassis (AP9600).
• Triple Expansion Chassis (AP9604).