User`s guide

®
USER’S GUIDE
Network Management Card
41
The control option
While the output of the UPS is on, select the UPS tab and then the control option
under Outlet Groups to turn on, turn off, or restart any outlet group. This option lists by
name and state (on or off) each outlet group that is configured through the settings
option.
You can select any of the following actions (or no action) for the group.
• When the state of the outlet group is off:
– Immediate On: Turn on the group immediately.
– Delayed On: Turn on the group after the number of seconds configured as Power
On Delay.
• When the state of the outlet group is on:
– Immediate Off: Turn off the group immediately
– Delayed Off: Turn off the group after the number of seconds configured as Power
Off Delay.
– Reboot: Turn off the group immediately, then turn it on after the number of
seconds configured as Reboot Duration and Power On Delay
– Delayed Reboot: Turn the outlet group off after the number of seconds configured
as Power Off Delay, then turn it on after the number of seconds configured as
Reboot Duration and Power On Delay.
After you select an action, click Next>> to view a detailed description of the action,
including the duration of any delays. Then click Apply to confirm the action.