User`s guide

®
USER’S GUIDE
Network Management Card
36
Control options for Silcon UPS and AIS 5000 UPS
By default, no control options are available for Silcon UPS or AIS 5000 UPS. To use
control options for a Silcon UPS or AIS 5000 UPS, you must enable the Accept
Remote Turn Off Commands option, available in the control console’s UPS Control
menu only when you use a local, serial connection to access the control console.
When Accept Remote Turn Off Commands is enabled:
• Two control options, Turn UPS Off and Turn UPS Off Gracefully, become available
for a Silcon UPS or an AIS 5000 UPS.
• Disable Remote Turn Off Commands, on the Control menu of the Web interface
and control console, allows you to disable using the Management Card to turn off the
Silcon UPS or AIS 5000 UPS.
Configuration Options
The power option
This option is available for all UPS models except Silcon UPS or AIS 5000 UPS.
The types of model-specific items you can configure include the following:
• Voltage settings that determine the voltage at which the UPS begins to use
automatic voltage regulation or switches to battery operation and that determine how
sensitive the UPS is to voltage variation
• Bypass settings define conditions under which the UPS can switch to bypass mode
• Alarm thresholds based on available runtime and redundant power and on UPS
Load
To use a serial connection, see Local access to the control console.
The available settings differ based on the UPS model. For detailed
information about fields and values available through the power
option and specific to your UPS model, see the online help.