User`s guide
®
USER’S GUIDE
Network Management Card
30
Model-specific status displayed
The types of model-specific information displayed include the following (some of which
are reported by phase for 3-phase UPS models):
• Voltage, Current, and Frequency information, such as input and output voltage,
input and output current, input frequency, input voltage in bypass mode, and
minimum and maximum input voltage during the last minute.
• UPS Load information, such as the load placed on the UPS in kVA or as a
percentage of available kVA, Watts, or VAC.
• Fault Tolerance information, such as redundant power available.
• Battery Information, such as available battery capacity, percentage of full battery
capacity, battery output current, rated voltage capacity of batteries, amp-hour rating
of battery cabinets, number of batteries installed, and number of faulty batteries.
• Status of internal and external components, such as intelligence and power
modules, circuit breaker box, external switch gear, and transformer.
Control Options
For UPS control actions, click Control on the left navigation menu of the UPS tab.
• To initiate a control action for the UPS of the initiating Management Card only, select
No for Apply to Sync Group?
• To initiate a control action for all members of the Synchronized Control Group to
which this Management Card belongs (if the option is allowed for Synchronized
Control Groups), select Yes for Apply to Sync Group?
To view detailed information about status items specific to the UPS model
associated with the Management Card, see the online help.
The option to apply an action to a Synchronized Control Group is
displayed only if the UPS supports Synchronized Control Groups and if its
Management Card is an active (enabled) group member.