User`s guide

®
USER’S GUIDE Network Management Card
28
Monitor and Configure the UPS
Overview Page
The Overview page is displayed when by default when you click the UPS tab or when
you click Overview on the left navigation menu of that tab.
Operating state
Below the UPS model name and configured UPS name, icons and accompanying text
indicate the operating state of the UPS:
Quick Status
The following information is displayed.
• In graphs:
– Load in Watts: A graph showing the load of the attached equipment as a
percentage of available Watts.
– Battery Capacity: A graph showing the percentage of the total UPS battery
capacity available to support attached equipment.
Operating State Icons Description
Online No alarms present.
In an alarm state
(Accompanying text
names the alarm
condition and gives
a brief description
of the alarm.)
An alarm condition with the severity Warning exists. A
warning alarm indicates a problem that could become
serious if not addressed.
An alarm condition with the severity Critical exists. A
critical alarm requires immediate attention to avoid data
loss or equipment damage.