User`s guide

®
USER’S GUIDE
Network Management Card
26
Recent Device Events
On the Home page, Recent Device Events displays, in reverse chronological order,
the events that occurred most recently and the dates and times they occurred. Click
More Events to view the entire event log.
How to Use the Tabs, Menus, and Links
Tabs
In addition to the tab for the Home page, the following tabs are displayed. Click a tab to
display a set of menu options:
• UPS: Display UPS status, issue UPS control commands, configure UPS
parameters, run diagnostic tests, configure and schedule shutdowns, and view
information about the UPS and its Management Card.
• Environment: View the status of environmental monitoring devices associated with
an AP9618 or AP9619 Management Card (the Integrated Environmental Monitor or
any APC environmental monitoring device attached externally) or the status of the
sensor of an APC S Type Power Conditioner with Battery Backup. View active
environmental alarms and recent environmental events. Configure thresholds and
other parameters related to environmental monitoring.
• Logs: View and configure event and data logs.
• Administration: Configure security, network connection, notification, and general
settings.
For a UPS, the Environment tab is displayed only when an integrated or
external environmental monitoring device is present.
For an APC S Type Power Conditioner with Battery Backup, the
Environment tab is displayed to monitor the device’s sensor.