User`s guide

®
USER’S GUIDE Network Management Card
23
How to Log On
Overview
You can use a Management Card’s DNS name or System IP address for the URL
address of the Web interface. Use your case-sensitive user name and password to log
on. The default user name differs by account type:
• apc for an Administrator
• device for a Device User
• readonly for a Read-Only User
The default password is apc for all three account types.
If you are using HTTPS (SSL/TSL) as your access protocol, your login
credentials are compared with information in a server certificate. If the
certificate was created with the APC Security Wizard, and an IP address was
specified as the common name in the certificate, you must use an IP address
to log on to the Management Card. If a DNS name was specified as the
common name on the certificate, you must use a DNS name to log on.
For information about the Web page displayed when you log on, see Home
Page.