User`s guide

®
USER’S GUIDE
Network Management Card
21
• Use the Ping utility.
• Define settings that affect FTP, Telnet, the Web interface and SSL, SNMP, e-mail,
DNS, Syslog, and WAP (Wireless Application Protocol).
• Configure paging parameters for analog or Telolocator Alphanumeric Protocol (TAP)
paging.
System menu
To perform these tasks, use the options of the System menu:
• Control Administrator and Device Manager access. (You can control Read Only
User access by using the Web interface only.)
• Define the Name, Contact, and Location values for the system.
• Set the date and time used by the Management Card.
• Through the Tools option:
– Restart the Management Card interface.
– Reset parameters to their default values.
– Delete SSH host keys and SSL certificates.
– Upload an initialization file (.ini file) that has been downloaded from another
Management Card. The current Management Card then uses the values in that .ini
file to configure its own settings.
• Configure modem parameters, including dial-in access to the control console at an
AP9618 Network Management Card using that Management Card’s internal analog
modem.
• Access system information about the Management Card.