User`s guide

®
USER’S GUIDE
Network Management Card
20
Main menu
Use the main Control Console menu to access the control console’s management
features:
1- Device Manager
2- Network
3- System
4- Logout
Device Manager menu
Use the options of the Device Manager menu to select the device to manage:
1- UPS Model Name for a UPS, or S20 AV UPS for an S Type Power Conditioner
2- Environment
The UPS option, named with the model name, enables an administrator or device user
to issue UPS control commands, perform diagnostic tests, configure Management
Card and UPS parameters, display detailed UPS status, and view information about
the UPS. A read-only user cannot change settings or parameter values.
The Environment option is displayed if an environmental monitor is present:
• For an AP9618 or AP9619 Network Management Card, this option enables an
administrator or device user to configure the Integrated Environmental Monitor and
any connected external environmental monitor.
• For an APC S Type Power Conditioner with Battery Backup, this option enables an
administrator or device user to configure the device’s sensor:
Network menu
To perform these tasks, use the options of the Network menu:
• Configure the TCP/IP settings of the Management Card or, if the Management Card
obtains its TCP/IP settings from a server, configure the settings for the type of server
(DHCP or BOOTP).
When you log on as Device Manager (equivalent to Device User in the Web
interface), you can access only the Device Manager menus and the Logout
menu.