User`s guide

®
USER’S GUIDE
Network Management Card
18
Main screen status fields.
• The Stat field reports the Management Card status.
Stat : P+ N+ A+
• The field that identifies the UPS model and name also reports the operating status of
the UPS.
Model Name named Tester 8 : On Line
• The environmental field reports the status of the sensors (Thresholds) and contacts
(Contact Alarms) at any environmental monitor, including the output relay (Relay) of
the Integrated Environmental Monitor at an AP9618 or AP9619 Management Card.
Thresholds Ok, Contact Alarms Ok, Relay OK
P+ The APC operating system (AOS) is functioning properly.
N+ The network is functioning properly.
N? A BOOTP request cycle is in progress.
N– The Management Card failed to connect to the network.
N! Another device is using the Management Card’s IP address.
A+ The application is functioning properly.
A– The application has a bad checksum.
A? The application is initializing.
A! The application is not compatible with the AOS.
If P+ is not displayed, contact APC support staff. See APC Worldwide
Customer Support.
For more information about the status of the sensor, contact, and output
relay, see Environmental Monitoring.