User`s guide

®
USER’S GUIDE Network Management Card
127
Index
A
About options
for information about the Management Card 104
for information about the UPS 48
for information on environmental monitors 53
Accept Remote Turn Off Commands,
for Silcon UPS 36
Access
enabling or disabling methods of access
to the control console 68
to the Web interface 66
priority for logging on 4
to the control console
by dialing in 15
locally 14
remotely 13
troubleshooting 120
Administration
General menu 100
Network menu 59
Notification menu 75
Security menu 54
Alarm Status
output relay 53
temperature and humidity 50
Alarm Status, input contacts 52
Analog mode for paging 85
Analog modem
AP9618 feature 1
configuring control console dial-in 15
connector on AP9618 faceplate 7, 8
using for control console access 13
AP9618U upgrade kit 2, 83
AP9619U upgrade kit 2
APC S Type Power Conditioner with Battery
Backup. See S Type Power Conditioner with
Battery Backup
Apply Local Computer Time 100
Audible Alarm 38
Authenticating users through RADIUS 54
Authentication Traps setting 80
Automatic log-off for inactivity 58
B
Basic Low Battery Duration 37
Basic Signaling Shutdown 37
BOOTP
BOOTP server providing TCP/IP settings 59
Status LED reporting BOOTP requests 10
C
Certificates, how to create, view, or remove 67
Community Name
for trap receivers 80
verifying correctness 121
config.ini file. See User configuration files.
Configuration options, UPS tab 36
Configuring
load-shedding 42
RADIUS authentication 55
shutdowns 37
Synchronized Control Group member 45
Contact identification (whom to contact) 100
Control actions 33
Control console
configuring access 68
Device Manager menu 20
main screen 16
navigating menus 19
refreshing menus 19
structure 19
Control options, Silcon and AIS 500 UPSs 36
Conversion of event codes for Out-of-Band
Management Card 87