User`s guide

®
USER’S GUIDE
Network Management Card
10
Status LED
This LED indicates the Management Card’s status.
Condition Description
Off One of the following situations exists:
• The Management Card is not receiving input power.
• The Management Card is starting up.
• The Management Card is not operating properly. It may need to be
repaired or replaced. Contact APC Worldwide Customer Support.
Solid Green The Management Card has valid TCP/IP settings.
Solid Orange A hardware failure has been detected in the Management Card. Contact
APC Worldwide Customer Support.
Flashing Green The Management Card does not have valid TCP/IP settings.
1
Flashing Orange The Management Card is making BOOTP requests.
1
Alternately
flashing Green
and Orange
If the LED is alternately flashing slowly, the Management Card is making
DHCP
2
requests.
1
If the LED is alternately flashing rapidly, the Management Card is starting
up.
1. If you do not use a BOOTP or DHCP server, see the Network Management Card Installation and
Quick Start Manual provided in printed format and on the APC Network Management Card Utility CD
in PDF to configure the TCP/IP settings of the Management Card.
2. To use a DHCP server, see TCP/IP and Communication Settings.