User`s guide

®
USER’S GUIDE
Network Management Card
99
2. Use the case-sensitive User Name and Password for Administrator or Device
User to log on. For Administrator, apc is the default for User Name and
Password. For the Device User, the defaults are device for User Name and
apc for Password.
3. Use the get command to transmit the text of a log to your local drive.
ftp>get event.txt
or
ftp>get data.txt
4. You can use the del command to clear the contents of either log.
ftp>del event.txt
or
ftp>del data.txt
You will not be asked to confirm the deletion.
• If you clear the data log, the event log records a deleted-log event.
• If you clear the event log, a new event.txt file records the event.
5. Type
quit at the ftp> prompt to exit from FTP.
Queries (SNMP GETs)
See SNMP for a description of SNMPv1 and SNMPv3 settings that enable an
NMS to perform informational queries. With SNMPv1, which does not encrypt
data before transmission, configuring the most restrictive SNMP access type
(READ) enables informational queries without allowing remote configuration
changes.