Specifications

NetShelter SX Networking Enclosure — Unpacking, Installation, and Customization Manual20
Airflow Management
Caution: Improper airflow could damage installed components.
Installing Airflow Management Panels
1 U
2
and 3 U
1
foam airflow management panels help isolate hot air and prevent it from entering the
cold aisle. Install airflow management panels in the channel along the right vertical mounting flange next
to inactive equipment such as patch panels. The left side of the enclosure does not require panels.
Note: To ensure proper airflow into networking switches
4
, keep open the networking switch
air intake
3
areas as well as the inlets
5
of the side airflow duct kit.
Note: Install the airflow management panels before installing any cabling.
ns1562a