Specifications

15NetShelter SX Networking Enclosure — Unpacking, Installation, and Customization Manual
Equipment Installation
Adjusting Vertical Mounting Flanges
Vertical mounting flanges come factory-installed on the
enclosure in the proper position for use with rack-mountable
equipment that has a depth of:
• 558.8 mm (22 in) for a 1070-mm deep enclosure
• 749.3 mm (29.5 in) for a 1200-mm deep enclosure
The mounting flanges are adjustable towards the front or the rear
of the enclosure to accommodate different rails or equipment
with other depths. The flanges can be adjusted to be as close as
279.4 mm (11 in) or as far apart as:
• 819 mm (32.25 in) for a 1070-mm deep enclosure
• 959 mm (37.75 in) for a 1200-mm deep enclosure
To adjust a vertical mounting flange:
Warning: To avoid personal injury or damage to
the enclosure, perform this procedure without any equipment installed on the mounting
flanges.
1. Remove the cable manager from the
front left vertical mounting flange.
ns1453a
ns1561a