Specifications

9NetShelter SX Networking Enclosure — Unpacking, Installation, and Customization Manual
Joining Enclosures
Enclosures can be joined with or without side panels installed to provide for alignment and some
stability.
Caution: Joining enclosures provides limited stability to the enclosures.
1. Remove the front and rear doors.
2. Choose between 24-in centers or 600-mm centers (see the detail view below).
3. Align the enclosures and join them using one M5 x 12 flat-head screw (provided in the hardware
bag) per bracket—two brackets for the front and two brackets for the rear.
4. Reinstall the doors.
Accessory Part Number Description
42 U/48 U
Baying Trim
AR7600 Fills the gap between the
enclosures spaced on 24-in
centers, providing finished
look.
ns1594b
24 in
600 mm
x 4