Specifications

11 NetShelter SX Cabinet - Installation and Customization Manual
Door Removal
1. Unlock the cabinet front door handle and open the door.
2. Disconnect the ground wire and any other wire connections
that may interfere with the removal of the doors.










3. The hinges come apart by lifting upward and outward. Slowly
lift and pull the door from the cabinet until the hinge pins on the
door are free of the hinges on the cabinet frame.
Door Installation
1. The doors self-align on hinge pins when properly
installed. With the door at a 
90 degree angle to the front of the 
cabinet, position the door over the hinge pins .

2. Slowly lower the door into the cabinet frame
ensuring that the door hinges correctly align to the
cabinet frame hinges.









3. Connect the ground wire and any other wire
connections.



ns2283a
ns1604b

ns2284a
ns2285a